How To Make Your Own Drain Cleaner

Plumbing problems in your home can be expensive.  If you don’t address them, you can cause irreversible damage to your home. It’s important to pay attention to the signs, no matter how small they may seem and call an emergency plumber immediately.   Sal’s Plumbing as been the best plumber in the South Bay since 1979.

We all have drains that are not “flowing” as well as we would like.  Especially here in the South Bay coming out of summer where are drains are full of all kinds of stuff brought in from the beach.  Most drain cleaner labels can make you dizzy with all the terminology. Lucky for you, there’s a DIY fix that makes it easy to unclog your own drains.

If you want to save money on drain cleaner and learn a little chemistry along the way, keep reading for the tips you need to know!

Ingredients for Home Made Drain Cleaner

When you’re making DIY drain cleaner, it’s best to have a stable list of ingredients that you can afford monthly. Start by researching the baseline supplies for the drain cleaner, then adjust your list to your needs and your budget. Here are the basic ingredients that you’re likely to buy.


Drain Cleaner Base

Baking soda is one of the best store-bought solutions for drain cleaning. Composed of sodium carbonate, baking soda is full of sodium that help break down dirt and grime. You can buy baking soda almost anywhere and because of its low price you can buy in bulk.  Baking soda is reactive, meaning that if you add an acid (such as vinegar) it will become excited. This compound can jostle and break down grime that’s built up in your drain.

The trick is starting with sodium. This means you can use salt or Borax instead of baking soda just as well. Anytime you combine a sodium base with an acid you will get a halfway decent cleaning solution.

You can think of Borax as a concentrated form of baking soda. It contains a few extra chemical chains that make it a cleaning alternative and not a cooking formula. If you decide to use Borax make sure to keep it away from any sensitive body parts, children, or pets.

Acids Are Part of Drain Cleaning

Acids are your key to a positive chemical reaction. When you add any acid, even one mild as lemon juice, to sodium, you get a reaction capable of cleaning your drain. If you want to unclog your drain, find a multipurpose acid that you can buy for cheap.

Vinegar is a great acid for your drain cleaning mixture. You can add it to any of the sodiums listed above to get quick results.  Lemon juice is a weaker acid that works just as well. However, lemons have less acidity than vinegar, meaning you will have to add more lemon juice than an average drain cleaner recipe.

Cream of tartar is less another option that is derived from tartaric acid. This makes it a viable acid that you can add to baking soda and water to get a great cleaner.

Sodium and Acid Reactions

For the most part when you add a weak salt base with a strong based acid you will get an acidic solution. Accordingly, combining medium-strength salts and acids will leave you with a fairly strong compound.

Adding sodium and citric acid will give you carbon dioxide gas. Don’t worry, adding the right amount of both creates enough reaction for drain cleaning. It will not cause you harm.

Steps to Unclog Your Own Drain

Now you know the cheapest and most simple ingredients for homemade drain cleaner. For this section, we’ll be talking about how to mix and apply your ingredients to your clogged drain.

First, get all of your ingredients in the right order. For example, you will always add your sodium before you add your acid solution. You might have some blockages at the surface of your drain, clean these out before moving forward.

Step 1
Begin by pouring your sodium solution to the drain. Remember, you can use any of the contents listed above. If you choose to use a powder like baking soda, you can use a funnel to pour it down the drain.

This fills your drain with the base to your draining reaction. It makes a foundation for your acid, leading to the dissolution of gunk and grime.

Step 2
Now it’s time you add your acids. You can use any of the acids presented in this post, just make sure to always add them after your sodium. Doing any of these steps out of order will make the process useless.

After you add something like vinegar or cream of tartar to your powdered sodium you must wait up to one hour. It’s advised that you plug your drain while you wait.

Step 3
Add a pot or two of boiling water to your drain. The hot water has an easier time passing through your drain and pushing the dissolved gunk through.   This will work for almost any drain you have in your home. If you are dealing with a larger drainage system you might want to buy a professional solution or call the best plumber in Torrance you can trust, Sals Plumbing.

If you try these steps, you have a good shot at clearing your drain. It’s also a valuable exercise because it will help your plumber get the job done quicker. As always please call Sals Plumbing in Torrance or Sals Plumbing in Redondo for your drain cleaning or any other plumbing problems.  (310) 692-4183

Thank You For Reading!


This blog post was written by eMaximize, the top plumber marketing agency in California.